Nortec RH2+ - Manual (Page 51)

Troubleshooting| 48
Organization of Troubleshooting Chapter
The troubleshooting chapter is broken down into 2 sections.
General Troubleshooting Deals with troubleshooting incorrect humidifier operation,
steam line and plumbing issues without any control
software faults.
Humidifier Warnings and Faults Deals with faults that are generated by the humidifier
control software.
Troubleshooting Requirements

Ensure the installation meets the installation requirements outlined in the Installation
Chapter of this manual.

Familiarize yourself with the operation of the humidifier by reading the Operation Chapter of
this manual.

Wiring diagram for specific for your humidifier is installed on the inside of the humidifier
door. A generic copy of the RH2 wiring diagram is also included at the end of this chapter
for reference purposes.

When contacting your local representative or Nortec for troubleshooting assistance, please
ensure the serial number has been obtained for reference purposes.
NOTE: Most humidifier faults are not caused by faulty equipment but rather by improper
installation. A complete fault diagnosis always involves a thorough examination of the
entire system. Often, the steam hose connection has not been properly executed, or the
fault lies with the humidity control system.
CAUTION: Be aware, when troubleshooting, that the humidifier is powered by high voltage
and familiarity with both good practices and wiring of the humidifier is recommended.
Any troubleshooting that requires opening the cabinet should be done by qualified
personnel.