Orion System OE742-XX-VAVZ - Manual (Page 7)

Form: ORION-OE282-01ZoneDmprAct-Sub-01A.doc
Page 1 of 1
Description
The OE282 Damper Actuator is a shaft mounted,
floating point control actuator. Actuators are
24VAC/24VDC with a 10K ohm feedback signal
for position monitoring. Wiring connection to the
actuator is by means of a modular phone cable
connector located on the actuator cover. The
actuator is rated for 45 in-lb of torque. All
actuators are electronically protected against
overload. The angle of rotation is mechanically
limited to 95
. When the end position of the
actuator or damper is reached, the actuator
automatically stops. For adjustment purposes,
the gears can be manually disengaged by
pushing the manual override button on the
actuator cover.
Applications
The OE282 Damper Actuator is used to provide
control of air volume dampers in an VAV or
Zoning system.
When used in VAV and Zoning applications it is
normally factory mounted in the OE742-31-
VAVZ, OE742-32-VAVZ. P.D. VAV/Zone
Controller Actuator Packages or the OE744-31-
VAVZ, OE744-32-VAVZ. P.I. VAV/Zone
Controller Actuator Packages.
It is also a component of the OE282-03 Slaved
VAV/Zone Damper Kit. This kit allows multiple
dampers (up to 2 total besides the master) to be
connected to a master OE742-31-vVAVZ, OE742-32-VAVZ P.D. Zone/VAV Controller Actuator Package or
OE744-31-VAVZ, OE744-32-VAVZ P.I. Zone/VAV Controller Actuator Packages. The OE282-03 Kit is typically
used when larger CFM requirements dictate multiple dampers be used.
OE282-01
Zone Damper Actuator
Technical Data OE282-01 Damper Actuator
Power Supply 24VAC
 20% 50/60HZ Angle of Rotation
Max. 95
, Adjustable
Life Cycle Rating 2.5 Million Cycles with Mechanical Stops
Power Consumption 3 VA Maximum Power Connection RJ-11 Modular Jack
Operating Temp -22
F to 122F Servicing Maintenance Free
Operating Humidity 5 to 95% RH Non-
Condensing
Quality Standard ISO 9001
Overload Protection Electronic Throughout 0 to
95
 Rotation
Agency Listings UL873 listed
CSA 4813 02 Certified
Feedback Signal 10K ohm 1W Potentiometer Torque Minimum 45 in-lb
Running Time 80-110 Seconds. Weight 1.2 lb.
Three Year Warranty WattMaster reserves the right to change specifications without notice