Quantum Composers 9250 Series - Manual (Page 42)

9250 Manual Version 1.2 | Quantum Composers
42
9. Appendix A – Specifications
9250 Specifications

Indoor use in dry conditions only

Ordinary Protection: This product is NOT protected against harmful ingress of moisture.

Class III Equipment (external 5VDC power source)

External Power Supply: Class II (ground connection not required for safety)
o Mains Supply Input: 100-240V ~ 50-60Hz 0.3A
o Output: 5VDC 2A

Pollution Degree II (Micro-Ambient Pollution restricted to temporary conductivity caused
by condensation).

External Power Supply: Installation (Overvoltage) Category II for transient over-voltages.

Maximum Relative Humidity: 0-80% relative humidity, non-condensing

Maximum altitude: 0 to 2000m (6562 ft.)

Accessories: USB cable & 5V (10W) DC Power Supply

Cleaning Instructions: Light dusting with cloth damp with water and/or usage of
compressed air is all that is needed.
9250 Specifications MIN TYP MAX UNIT
I/O Configuration
Model/Output
9254 – 4 Independent + 4 Virtual Channels (Mux)
Input 1 Selectable Trigger/Gate Input
Internal Rate Generator
Rate (T
0
Period) 0.00025 - 25,000,000 Hz
Resolution - 4 - ns
Accuracy 4ns + (0.0001 x Period)
T
0
Period Jitter - - 40 ps(RMS)
Time Base 250MHz, Low Jitter PLL
Oscillator 25MHz, 280ppb Crystal Oscillator
System Modes Single, Continuous, Burst, Duty Cycle
Burst Mode 1 - 1,000,000 Pulses
Duty Cycle Mode 1 - 1,000,000 Pulses
Pulse Control Modes Internal Rate Generator, External Trigger/Gate