QuickLabel Vivo! Touch - Manual (Page 55)

Designing and Printing Labels
Vivo! Touch User Guide 41
6 Enter the width of the label stock.
• If you are using gap media, enter the width of the label. Do not include the
narrow portions of exposed liner near the edges of the media.
• If you are using reflective mark or continuous media, enter the total width of
the media construction.
7 Enter the label length (also called maximum printable length, or MPL).
• If you are using gap or reflective mark media, the MPL is printed on a label
located inside the cardboard core of the label roll.
• If you are using continuous media, you will determine length based on the
height dimension in your label file. You can view this dimension using your
label design application software.
8 Select the type of material the label will be printed on. Select a print speed.
9 If necessary, enter horizontal and vertical offsets to adjust the printed label
position on the media.
10 Choose Add .
11 If necessary, you can edit or delete label stocks.
• To edit a label stock, select it from the list and modify its settings. Then choose
Modify
.
• To delete a label stock, select it from the list and choose Delete .
12 If necessary, you can import or export label stock information. This is helpful when
transferring label stock settings between multiple computers.
• Import - Choose this option to import label stock information from a file.
• Export - Choose this option to export all label stock information to a file.
13 Choose OK .
Setting up Color
Before you print using a third-party application, you will need to select color options
to define how colors on your label will be printed.