REMKO RXW 261 - Manual (Page 11)

TIMER Button
The activation and switch-off time can be programmed with this button.
By pressign the button Timer on or Timer off, the timer is activated
and the time display turns off. The timer symbol for the switch-on/
off time will flash. The timer display on the indoor unit lights up. The
desired turn on or turn off time is set by pressing the buttons HR. and
MIN. After completed adjustment, the timer symbol blinks for another
30 seconds. When the programmed time has been reached, the device
is automatically turned on or off. If the indoor unit is automatically
switched on, then the mode, temperature and fan speed for the last
setting is reactivated. The turn on/off time can be prematurely cancelled
by pressing the appropriate timer button or the ON/OFF button. The
timer display on the indoor unit goes out.
TIMER Buttons ON
Timer on HR/MIN 30 sec.
TIMER Buttons OFF
Timer off HR/MIN 30 sec.
With this button, a programming function is activated, which causes the
target temperature in the cooling mode to increase after one hour by
1 °C and after 2 hours by 2 °C. In heating mode, the target temperature
is decreased after one hour by 1 °C and after 2 hours by 2 °C. The unit is
automatically turned off after 8 hours.
SLEEP Button
SLEEP SLEEP SLEEP
The oscillating function of the air discharge fins can be adjusted with this
button. This makes it possible to directly switch between an adjusted
position and the oscillating function. The air distribution in the room is
improved with the swing function.
SWING Button
SWING SWING SWING
11