REMKO RXW 261 - Manual (Page 8)

Button functions
The stand by readiness of the remote control is signalled by the blinking
dot on the remote control. Stand by of remote control
RESET Button
By pressing the RESET button in the battery compartment, the remote
control can be reset. Then the time is to be programmed (see “CLOCK
button“).
RESET 5 sec. Setting the clock
By pressing the ON / OFF button, you can activate or deactivate your
unit. The programmed settings and adjustment values before the unit
was turned off will appear on the display.
ON/OFF Button
ON/OFF ON/OFF
▲/▼
Buttons
The ▼ button can be used to reduce the desired target temperature, the
▲button can be used to increase it. In automatic mode, the temperature
can be increased or decreased by 1° C.
In dehumidification mode, no temperature adjustment can be made.
▼
Cooling mode
The display turns off
after 1 min.
Automatic mode
A symbol is shown on the display to indicate that the settings are being transferred.
▼
▼
▼
REMKO RXW
8