RGBLink VSP 1314 User Manual - Manual (Page 59)

5.System Setup and Operation
How to set input matrix
VSP 1314 User Manual 59
How to set input matrix
Make sure equipment normal operation. Please refer to: How to make
equipment normal operation
Operation description:
This function can support 2 or 3 layers to play the same videos, to meet
various requirements.
Operation as following:
1.Press and light up green;
2.LCD shows the MENU, rotate the adjust knob to select Input;
3.Press the adjust knob to ensure, and rotate the adjust knob to select
3.
4. Enter to set Input Matrix;
5.Press the adjust knob to ensure and enter Matrix; Rotate the adjust knob
to set these 3 Channel. That can achieve matrix;
Input
Output
Split
View
Input Format
Input Matrix
Channel 1： Input 1
Channel 2： Input 2
Channel 3： Test Pattern