RGBLink VSP 1314 User Manual - Manual (Page 65)

5.System Setup and Operation
How to use BLACK
VSP 1314 User Manual 65
How to use BLACK
Make sure equipment normal operation. Detail please refer to : How to
make equipment normal operation
BLACK：
Black signal is a special effect which in order to set background directlly in
the special scene.
VSP1314 default layer 3 as background. That is button 0 is the
background;
Operation step as following:
1.Press and light up yellow ,at preview can
2.check the image;
3.If is not background, please press and light up green.LCD shows the
4.MENU mode, press the adjust knob to select Test Pattern;
5.Press the adjust knob and enter it, select Manual Color;
6.Press the adjust knob and enter it; Press the adjust knob to set Red、
Green、Blue as 0,That is set test pattern as background;
USB Setting
Test Pattern
Language
System
Manual Color
Auto Color
Roll Right
Roll Left
Red： 0
Green： 0
Blue： 0