RLE Protocol Converter V.2.4 - Manual (Page 39)

rletech.com Protocol Converter User Guide 39
3
Configuration
3.6.4 SNMP Register Configuration
If you are configuring an SNMP device, the register configuration page looks like this:
Figure 3.17 SNMP Register Configuration
1 Type an appropriate value in each field, or choose the value from the drop-down.
Option Description
SNMP Get OID The OID (object identifier) the Protocol Converter uses to
gather the correct integer data from the SNMP device
being polled.
OID Type The object identifier type. Currently, the Protocol Converter
can poll Integer data.
Gain The gain value of the raw data being received (set only if
necessary).
Offset The offset value of the calculated reading to the register.
Label Designate a name (label) for the register being configured.
Labels can contain up to 30 alphanumeric characters.
HTML Display This option allows you to choose how the value is
displayed on the register page. Choose from Integer (whole
number) or Float (number plus decimal).
Table 3.6 SNMP Register Configuration Options