RLE Protocol Converter V.2.4 - Manual (Page 49)

rletech.com Protocol Converter User Guide 49
3
Configuration
Figure 3.28 BACnet PICS Information
UDP Port This is the user datagram protocol port, which is used by
applications to send messages to a device (in this case, the
Protocol Converter).
Enter 0 to specify port 47808 as the UDP port. If another
port is specified by your application, enter a new port
number in this field.
Default setting: 0 (47808)
BACnet-MS/TP Port3 Max
Master
Set the slave address, 1/127. 0 = slave only.
Default setting: 0
BACnet/IP Read-Multiple Enable or disable this feature.
BACnet PICS link This link displays the protocol implementation conformance
statement (PICS). The PICS Web page shows general
BACnet capabilities of the device (for example, available
LAN options). An example of a BACnet PICS page is
shown in Figure 3.28 .
Engineering Units Click this link to view a list of the units supported by the
device, coupled with their numerical BACnet identifiers.
BACnet/IP COV Clients This is a list of the BACnet clients that will receive a
notification when the Protocol Converter notes a change of
value (COV).
Configure these addresses on the Registers tab.
BACnet BBMD-BDT This feature is used by some BACnet masters for discovery
on different subnets. Enter information as applicable to
your application.
Option Description
Table 3.9 BACnet Server Configuration Options (continued)