RLE Protocol Converter V.2.4 - Manual (Page 64)

64 Protocol Converter User Guide 800.518.1519
A Load Firmware & Configuration Files
A.6. Load a Device Configuration (.xml) File
An .xml file that you have saved using the Protocol Converter’s user interface can be loaded to
another device. This procedure may not work in all cases; some manufacturers use the same
register set across different models of the same type of device, and others do not.
To load an .xml file to a device:
1 Click the Device Configuration link in the top bar.
Figure A.11 Device Configuration Link
2 The Device Configuration web page displays. Locate the configuration box for the device
to which you want to upload a saved .xml file.
Figure A.12 Device Configuration Web Page
3 Click the Upload XML link in that device’s configuration box.
The XML Upload dialog displays in a secondary browser window.
Figure A.13 XML Upload Dialog
4 Browse for the .xml file you saved. Select the file, then in the Index Base box, indicate the
index (register) number you want to start from when the upload occurs.