Teac CD-RW901MKII - Manual (Page 14)

14
TASCAM CD-RW901MKII
2 − Features of the CD-RW901MKII
recording on and off (see “Synchronized recording” on
page 28 for details).
t SEARCH keys ( ∆/˚ ) Use these keys to move the
playback position inside a track.
y SKIP ( Â /¯ ) keys Use these keys to move
between tracks when playing back (equivalent to rotat-
ing the MULTI JOG dial).
u STOP key Use this key to stop playback or recording.
i OPEN/CLOSE key Opens and close the disc tray.
o CLEAR key Clears a mistaken entry made with the
number keys.
In the program mode, pressing this key cancels the
program entered at the last.
It also acts like the ESCAPE key in the Menu mode.
p ENTER key Pressing this key is equivalent to pressing
the MULTI JOG dial to confirm an entry.
a INC PLAY key Use this key to switch Incrementl play-
back on or off.
s MENU key and +/– key Pressing the MENU key turns
the mode on or off. The +/– key is used to select menu
options and make settings during Menu mode.
d PITCH key and +/– key Use this key to switch Pitch
Control on and off, and set the pitch value.
f ERASE key Erases tracks (CD-RW discs only), or a
whole disc, or to refresh a “bad” disc, or to unfinalize a
finalized disc (see “Erasing” on page 34 for details).
g FINALIZE key Finalizes recordable discs. See
“Finalizing” on page 33 for details.
h REC MUTE key Use this key when recording, to mute
the input signal for about four seconds and then to enter
record ready mode (see “Rec mute function” on page 30).
j INPUT SEL key Use this key to select the different
audio inputs and the input combinations (see “Input
selection” on page 26 for full details).
k CALL key Pressing this key locates a track to the last
point where playback was previously started in playback
ready mode, and puts the unit into playback ready mode.
During recording, pressing this key assigns an index
number manually.
l PAUSE key Use this key to standby for playback
or recording.
; PLAY key Use this key to start playback, or enter
record mode from record ready mode.