Teac CD-RW901MKII - Manual (Page 18)

18
TASCAM CD-RW901MKII
4 − Playback operations
Track search
Press the ∆/˚ search key continuously on the front panel,
or the SEARCH ∆/˚ key on the remote control. To
stop the search function, simply release the ∆/˚ or the
SEARCH key.
NOTE
The search function does not operate with MP3 discs.
Normal search
Using the number keys on the remote control, the number of
the desired track can be entered directory. Even numbers with
two or three digits can be entered easily. For example:
Track 9: press ‘9’ and 009 will be displayed.
Track 12: press ‘1’ and ‘2’ and 012 will be displayed.
Track 103: press ‘1’ and ‘0’ and ‘3’ and 103 will be displayed.
After input, press the PLAY key to start playback. Or, the
PAUSE key to cue the track at its head position and enter
playback standby mode.
You can also enter the track number and start playback by
pushing the
MULTI JOG dial or using the ENTER key.
NOTE
This function cannot be used in Program or Random mode.
Selecting by track number
Direct search
By specifying time from the start of a certain track, you can
start playback from a specified point of a specified track.
ª Basic operation
During stop, play or playback standby modes, use the number
keys on the remote control to input the three-digit track
number (such as 002 for track 2), then the desired elapsed time
(***min **sec) from the start of that track.
Example: To specify 1 min 30 sec from the start of track 2,
input “002 001 30.”
During input, the counter in the display will flash.
NOTE
Regardless of the time display mode (see “Time
display switching on page 20), the time from the start
of the specified track is displayed.
Pressing the CLEAR key cancels the input at any stage during
input.
During stop or playback modes, when the final digit is entered,
the desired position is automatically located and playback will
begin from the desired point. During playback standby mode,
at the desired point the unit will enter playback standby mode.
NOTE
If a point which does not exist is entered, Direct
Search time entry mode will be cancelled.
The direct search function cannot be used in program
or random mode.
For MP3 discs, time cannot be specified within a track.
However, if you input the three-digit track number,
playback will begin from the start of that track.
Operation variations
Even if the final “seconds” time value is not input, playback
will begin from the selected “minutes” time after pressing
the
ENTER or PLAY key. Or, if you press the PAUSE key,
the unit will enter the playback standby mode at the selected
point.
ª Specifying a track number only
After inputting the track number, press the ENTER or PLAY
key to begin playback of that track, or the PAUSE key to cue
the track and enter playback standby mode.
NOTE
Instead of inputting the three-digit track number, you
can input only the desired track number.
Example: To specify track 3, input only “3”.
ª Specifying to the minute
After inputting the three-digit track number and the number of
minutes after the start of the track, press the
ENTER or PLAY
key to begin playback of that track, or the PAUSE key to cue
the track and enter playback standby mode.
Example: To specify 1 min 00 sec from the start of track 2,
input “002 001.”
NOTE
Following the above example, if “0021” is input, the
same position will be located.