Teac CD-RW901MKII - Manual (Page 23)

TASCAM CD-RW901MKII
23
4 − Playback operations
In this function, when the unit is in playback mode, and when
the
PLAY key is pressed, the unit starts playback from the
beginning of the next track.
Use the Menu option or the
INC PLAY key on the remote
control to set this mode on. The TRACK indicator will blink
during playback or playback ready mode.
When the STOP key is pressed, the unit will enter playback
ready mode at the start of the next track.
Incremental playback
When in playback or playback ready mode, if the FINALIZE
key is pressed, the display shows “ISRC” code on the screen.
If there is no “ISRC” code on the disc or the code has not
been recorded on the disc,
Incomplete!
will appears on the
display.
International Standard Recording Code (ISRC)
Call function allows the unit’s playback position to be
returned to the point at which playback last started from
ready mode. If there is no “call point”, an error message
No
Call PT!!
will be displayed.
NOTE
This function cannot be used with program, random
and MP3 playback mode.
Call function
When nearing the end of a track or disc, the EOM indicator will
light up on the display.
The number of seconds (1 to 99) before the track/disc end that
the indicator is displayed can be set beforehand.
To set the message display time, use the EOM TRK or EOM
DISC options on the PLAY sub-menu (see “Operation basics”
on page 16).
NOTE
This function cannot be used with MP3 playback mode.
End of disc/track message (EOM)
Using the auto cue function, you can select a cue point where
sound begins (not where a track begins) within a track.
Turn the auto cue function on and use the A_CUE LEVEL
sub-menu option (see “Operation basics” on page 16) to set the
sound detection level (-24, -30, -36, -42, -48, -54, -60, -66 and
-72 dB).
Then, select a track and press the
PLAY key. The unit enters
playback ready mode.
When the PLAY key is pressed again, playback begins at
exactly the cue point.
While the auto function is on, the A.CUE indicator lights up on
the display.
Auto Cue function
This function allows the playing back a single track, and the
automatic cuing of the next track ready for playback.
Use the A_READY sub-menu option to turn the function on or
off. When on, the A.READY indicator lights up on the display.
Combined with Auto Cue function, the unit enters playback
ready mode at the point where the sound detection level is set
in A_CUE LEVEL sub-menu option of the next track.
Auto Ready function