4 − playback operations, Discs for playback, Simple playback operations – Teac CD-RW901MKII User Manual

Page 17: Track selection, Using the skip function

Advertising
background image

TASCAM CD-RW901MKII

17

The CD-RW901MKII can be used to play back CDs (including

CD-R and CD-RW discs that have been recorded and finalized

on other types of recorder), as well as CD-R discs and CD-RW

discs that have been recorded on the unit.

Audio files in MP3 format on CD-ROM, CD-R and CD-RW

are also playable on the unit.

Track selection

Skipping track numbers backward or forward.

1. Select desired tracks for playback with the MULTI

JOG dial on the front panel. Turning clockwise

skips the track number backward and counter-

clockwise skips forward.

Or, press the

SKIP key on the remote control.

Pressing  key skips the track number back-

ward and ¯ key skips forward.

2. Press the PLAY key to start playback.

Or, press the

PAUSE key to cue the track and enter

playback standby mode after moving to the head

of the selected track. To start playback, press the

PLAY key.

Using the skip function

Simple playback operations

WARNING

If you are monitoring using headphones, first adjust
the level control to low on the unit, then connect
to the PHONES jack before playing back. This will
prevent any possible damage to your hearing.

NOTE

The explanation in this manual will assume the user is
starting from the normal Continuous mode.

1. Press the

POWER

switch to turn on the unit.

2. Press the

OPEN/CLOSE

key to open the disc tray.

The display shows

Open

. Insert a disc in the tray

with the label side up.

3. Press the

OPEN/CLOSE

key to close the tray. The

display shows

Close

when a disc is loaded into the

unit, then

TOC Reading

will appear, with the peri-

od flashing.

When the TOC has been read, the display shows the

number of tracks and total running time of the disc.

Disc type

Total running time

Total number of tracks

The CD-RW901MKII also shows one of the follow-

ing:

TOC

A disc finalized

MP3

A disc contains MP3 files

4. Press the

PLAY

key to start playback.

Adjust the connected monitor system, or the level

control for the

PHONES

on the unit to set the listen-

ing level you desire.

NOTE

If a disc has scratch or grime, it could cause the laser
pickup to “skip.” In this case, set the READ SPEED
sub-menu in the PLAY menu option to “High“ (see
“Operation basics” on page 16). This may resolve the
problem, however, the unit’s running sound may
become louder.

5. To stop playback, press the

STOP

key.

To temporarily stop playback and enter playback

standby mode, press the

PAUSE

key. To resume

playback, press the

PLAY

key again.

NOTE

To confirm the total playing time, use the PLAY TIME
option in the SYSTEM sub-menu (see “Operation
basics” on page 16).

Discs for playback

The CD discs in the CD-RW901MKII can play back the types

of discs listed below.

Commercial pre-recorded CDs recorded in CD-DA format.

CD-R and CD-RW discs that have been recorded in

CD-DA format and finalized properly.

MP3 files recorded in ISO9660 level 1 and level 2

format on CD-R and CD-RW discs, and properly final-

ized. MP3 files that are recorded to a disc with Joliet

format extensions are also playable.

4 − Playback operations

Advertising
This manual is related to the following products: