7 − titling, Title input operation, Disc title input – Teac CD-RW901MKII User Manual

Page 35: Track title input, Disc title input track title input, Important safety instructions

Advertising
background image

TASCAM CD-RW901MKII

35

IMPORTANT SAFETY INSTRUCTIONS

Titles can be given to the disc and the tracks on the disc, using

the TEXT EDIT option on the TEXT sub-menu.

NOTE

After a new title is selected and entered on the disc,
TOC will light up on the display. If the power is turned
off, the TOC has not been recorded on the disc and

the titles will not have be added. You must finalize
the disc to save the titles.

Follow the guidelines below to input titles on the screen.

Operate them when in the text edit mode.
It is more efficient to connect a keyboard for title input ( see

“Title input by keyboard” on page 36).

Select the type of character for input
Press the

DISPLAY

key on the unit or the remote control

to select from two different types of characters.

Lower case letters/code: no indication
Capital letters/code: CAPS
Input procedure
Rotate the

MULTI JOG

dial or the

MENU (+/-)

keys on

the remote control to get the desired characters on the

display.

Push the

MULTI JOG

dial or press the

ENTER

key on

the remote control to enter.

To move the cursor position
Use the

∆/˙

key and the

˚/¥

key on the front

panel, or the

SEARCH

key on the remote control.

To delete characters
Place the cursor on the character, then press the

ERASE/DEL

key on the front panel, or the

ERASE

key

on the remote control.

To insert characters
Move the cursor to the location where you wish to insert

a character, and press the

FINALIZE/INS

key on the

front panel or the

FINALIZE

key on the remote control.

To change a character
Place the cursor on the character to be changed, then

input the desired character.

NOTE

As with the TEXT menu, if you attempt to eject the
disc without writing the TOC to the disc, the display
will show

Sure? Text!

. If you want to eject the disc

without performing a TOC write, press the OPEN/
CLOSE key while “Sure Text!” is shown on the display.
The text that have been edited or entered will be
abandoned.

The disc or track title on a finalized disc cannot be
edited. Unfinalizing (CD-RW only) is needed in this
case to use the title input function.

Title input operation

1. While stopped, select the TEXT EDIT option in the

TEXT sub-menu (see “Operation basic” on page 16).

2. Rotate the

MULTI JOG

dial or repeatedly press the

MENU (+/-)

keys on the remote control to select the

track number you wish to title.

3. Push the

MULTI JOG

dial or press the

ENTER

key

on the remote control.

Now, you can input or edit the track title following

the guidelines above.

4. Press the

MENU

key to enter.

If you want to cancel, press the

STOP

key.

Track title input

Disc title input

1. While stopped, select the TEXT EDIT option in the

TEXT sub-menu (see “Operation basic” on page

16).

Text> Disc

will appear.

2. Press the

MULTI JOG

dial or the

MENU (+/-)

key on

the remote control.

Now, you can input or edit the disc title following

the guidelines above.

3. Press the

MENU

key to enter.

If you want to cancel, press the

STOP

key.

7 − Titling

Advertising
This manual is related to the following products: