Teac CD-A550MKII - Manual (Page 12)

12
TASCAM CD-A550MKII
2 – Names and Functions of Parts
! TAPE INPUT (UNBALANCED) jacks
Input for analog source signals (–9 dBu, unbalanced)
to record to the cassette tape.
@ TAPE COMMON OUTPUT (UNBALANCED) jacks
These are unbalanced outputs (–4.5 dBu) for the
cassette tape playback signal. During recording
or when in record ready mode, the signal being
recorded is output. However, depending on the
setting of the COMMON OUT item in the menu,
the CD playback signal can be output instead. (See
“Setting the common output signal” on page 19.)
# CD OUTPUT (UNBALANCED) jacks
These are unbalanced outputs (–10 dBV) for the CD
playback signal.
$ CD DIGITAL OUTPUT (COAXIAL) jack
This digital output sends the CD playback signal in
S/PDIF format.
% VOLTAGE SELECTOR SW
Use this switch to set the input voltage to either 230V
or 120V.
NOTE
• The voltage selector is only available on units for
specific markets.
• In North America, use only on 120V supply.
Rear panel