Selecting a track, Skipping to the next or previous track, Selecting by track number – Teac CD-A550MKII User Manual

Page 23: Selecting a folder (data cds only), 5 – playing back cds

Advertising
background image

TASCAM CD-A550MKII

23

5 – Playing Back CDs

Selecting a track

There are two ways to select a track. You can move (skip)

to the previous or next track, or you can select a track

directly by its track number. In addition, you can skip

to the next or previous folder of a data CD.

Skipping to the next or previous track

Press the

Ô

/

Â

or

¯

/

key on the main unit

or the

SKIP

Â

/

¯

key on the remote control. In

addition, if you press and hold a

SKIP

Â

/

¯

key

on the remote control, the unit skips through multiple

tracks successively.

NOTE

If you skip to a track during playback, the selected

track begins playing immediately.

If you skip to a track while playback is paused or

stopped, playback pauses at the beginning of the
selected track.

Selecting by track number

You can use the numeric keys (0–9) on the remote

control to directly set a track for playback by number.
Track numbers can have up to two digits for audio CDs

and up to three digits for data CDs.

1 Use the remote control numeric keys (0–9) to input

the track number. Input the track number starting

with the first digit as in the example below.

• To select track 1:

Press the “

1

” key one time.

• To select track 12:

Press the “

1

” key followed by the “

2

” key.

2 Press the CD

PLAY

key on the main unit or the

remote control. The selected track begins to play.

NOTE

If you press the READY key instead of the CD PLAY

key, playback is paused at the beginning of the
selected track.

If you press the ENTER key instead of the CD PLAY

key, the following occurs depending on whether the
unit was playing before the track number was input
in step 1 above.

Playing: the selected track starts to play.
Paused or stopped: the unit pauses at the begin-
ning of the selected track.

The numeric keys cannot be used to select a track

when in program or random mode.

Selecting a folder (data CDs only)

When using a data CD, you can skip to the previous

or next folder by pressing the

FOLDER SEARCH

/

+

keys while pressing and holding the

SHIFT

key on the

main unit or by pressing the

FOLDER

Ó

/

Á

keys on the

remote control. This will skip to the beginning of the

first track in the previous or next folder. If you hold

down one of these keys, you can skip through folders

continually.

Advertising