Teac CD-A550MKII - Manual (Page 32)

32
TASCAM CD-A550MKII
5 – Playing Back CDs
Call function
The call function allows you to return to the last point
where playback was started from a paused state (call
point) and pause again.
Press the
CALL key on the main unit or the remote
control during playback or when stopped to use the
call function.
The call point is erased after any of the following
operations.
• The power is turned OFF
• The disc tray is opened
• The playback mode is changed
• The folder playback function ON/OFF setting is
changed
• The folder is changed
NOTE
• If you press the CALL key when no call point has
been set, “No Call Pt!” appears on the main display.
• The call function cannot be used during random
playback mode.
Resume playback
Turn the resume playback function ON to allow
playback to restart from the position where playback
was last stopped (resume point).
When the resume playback function is ON,
RESUME
appears on the display.
1 When in standard display mode, press the
MENU
key on the main unit or the remote control to enter
menu mode.
2 Use the – / + keys on the main unit or the remote con-
trol to show “RESUME?” on the main display, and
press the ENTER key on the main unit or the remote
control.
3 Use the – / + keys on the main unit or the remote con-
trol to select “ON” or “OFF” (default value).
4 Press the ENTER key to return to the standard dis-
play.
NOTE
• The resume point ON/OFF setting is retained even if
the power is turned OFF.
• The resume point is erased after any of the following
operations.
–The disc tray is opened
–The folder playback function ON/OFF setting is
changed
–The folder is changed
–The playback mode is changed
EOM function
Turn the EOM (End Of Message) function ON to have
the unit start blinking the playback time display when
the audio CD reaches the remaining playback time set
in advance. Use the menu to set the EOM function. (See
“Using the menu” on page 16 for details about how to
use the menu.)
1 When in standard display mode, press the
MENU
key on the main unit or the remote control to enter
menu mode.
2 Use the –/+ keys on the main unit or the remote con-
trol to show “
EOM DISP?
” on the main display,
and press the ENTER key.
3 Use the – / + keys to choose one of the following set-
tings.
Options: OFF (default value), 5sec, 10sec, 15sec,
20sec, 25sec, 30sec, 35sec
All the settings except for “OFF” turn the EOM
function ON and indicate the number of seconds
before the end of the track when the unit’s playback
time starts to blink on the display.
4 Press the ENTER key to return to the standard dis-
play.
NOTE
This setting is retained even if the power is turned OFF.