Teac CD-A550MKII - Manual (Page 18)

18
TASCAM CD-A550MKII
4 – Preparations
Connecting headphones
Connect stereo headphones to the
PHONES jack on the
front panel. Use the PHONES knob to the right of the
PHONES jack to adjust the volume.
Use the MONITOR switch to the left of the PHONES jack
to select the sound that is output through the PHONES
jack. Choose either CD sound only ( CD position), tape
sound only ( TAPE position) or a mix of the CD and tape
sounds ( MIX position).
Connecting external audio devices (input)
Connect external audio sources, including CD players
and mixers, to this unit’s TAPE INPUT ( UNBALANCED )
jacks. Use the TAPE INPUT SOURCE menu item to
select the input. Use the INPUT knob on the front panel
to adjust the input volume.
Connecting external audio devices (output)
For analog output, this unit has
TAPE COMMON
OUTPUT and CD ANALOG OUTPUT jacks.
In addition, the CD playback signal can be output
digitally from the CD DIGITAL OUTPUT jack in S/PDIF
format.
The
CD OUTPUT jacks ( ANALOG and DIGITAL ) always
output the CD playback signal. The TAPE COMMON
OUTPUT jacks output the signal selected using the
COMMON OUT menu item. (See “Setting the common
output signal” on page 19.)
Making connections
ANALOG
IN
(UNBALANCED)
L R
ANALOG
OUT
(UNBALANCED)
L R
ANALOG
IN
(UNBALANCED)
L R
DIGITAL
IN
(S/PDIF)