Teac CD-A550MKII - Manual (Page 14)

14
TASCAM CD-A550MKII
2 – Names and Functions of Parts
Display
This unit shows the following information on the display.
CD Section
1 MP3 indicator
This indicator appears when a data CD with MP3 or
WAV files is loaded in the unit.
2 CD function display
The FOLDER , A.CUE , A.READY and A.SPACE indicators appear
when the CD folder playback function, auto ready
function, auto cue function and auto space function
are ON, respectively.
u A.SPACE key
Press to turn the auto space function ON and OFF.
(See “Auto space function” on page 31.)
i A.CUE key
Press to turn the auto cue function ON and OFF. (See
“Auto cue function (audio CDs only)” on page 29.)
o A.READY key
Press to turn the auto ready function ON and OFF.
(See “Auto ready function” on page 30.)
p MENU key
When in standard display mode, press this key to
switch to the menu mode, which allows menu items
to be selected. When in menu item selection mode,
press this to return to the standard display mode.
When editing a menu item, press this key to return
to menu item selection display. (See “3 – Menu” on
page 16.)
a REPEAT key
Press to turn the repeat playback function ON and
OFF. (See “Repeat playback” on page 28.)
s A–B key
Press this to set and unset the start point and end
point for A–B repeat playback. (See “A–B repeat
playback” on page 29.)
d FOLDER PLAY key
Press to turn the folder playback function ON and
OFF. (See “Folder playback (data CDs only)” on
page 24.)
f SEARCH Ô/ keys
Press and hold these keys to search backwards or
forwards.
g SKIP Â/¯ keys
Press these to skip to the previous or next track.
h STOP key
Press to stop CD playback.
j OPEN/CLOSE key
Press to open and close the disc tray.
k Numerical keys
Use these to designate track numbers during CD
playback and program input.
l CLEAR key
Press this to remove a track from the program when
editing the program. (See “Programmed playback”
on page 26.)
; ENTER key
When in menu mode, press this to make a selection
or confirm a setting.
z –/+ keys
When in menu mode, use these to make selections
and settings.
x TAPE EDIT key
Press to execute the TAPE EDIT function. (See “Using
the TAPE EDIT function” on page 39.)
c PROGRAM EDIT key
Press to enter program editing mode. (See
“Programmed playback” on page 26.)
Press during program editing mode to exit program
editing mode and return to the standard display.
v CALL key
Press to pause playback and return to the point
where playback was last started from a paused state.
(See “Call function” on page 32.)
b READY key
Press to pause CD playback.
n PLAY key
When stopped or paused, press to start CD playback.
m FOLDER Ó/Á key
Press to switch the folder on a data CD.