Setting the common output signal, Preparing the remote control, Installing the batteries – Teac CD-A550MKII User Manual

Page 19: When to change the batteries, Precautions for the use of batteries, 4 – preparations

Advertising
background image

TASCAM CD-A550MKII

19

4 – Preparations

Setting the common output signal

Set the signal output from the

TAPE COMMON OUTPUT

jacks according to your operating needs for this unit.
1 When in standard display mode, press the

MENU

key on the main unit or the remote control to enter

menu mode.

2 Use the –/+ keys on the main unit or the remote con-

trol to show the

COMMON OUT?

item on the main

display, and press the

ENTER

key on the main unit

or the remote control.

3 Use the –/+ keys on the main unit or the remote con-

trol to select one of the following choices.

TAPE

: This always outputs the tape playback signal.

AUTO

(default value): outputs either the CD or the

tape playback signal. When both are playing at the

same time, only the tape signal is output.

MIX

: Outputs both the CD and tape playback

signals, mixing them when they are playing

simultaneously.

4 Press the

ENTER

key to return to the standard dis-

play.

If you want to output the CD and tape signals to

different devices (or different channels of a mixer,
for example), set the COMMON OUT item to “TAPE.”
By doing so, the CD signal will be output from the CD
OUTPUT jacks, while the tape signal will be output
from the TAPE COMMON OUTPUT jacks.

If you’re outputting the signal of this unit to one ex-

ternal device, such as an amplifier, set the COMMON
OUT item to “AUTO” or “MIX.” By doing so, this unit
outputs the signal of the CD and/or the tape depend-
ing on their playback status.

Preparing the remote control

Installing the batteries

1 Open the cover on the back.
2 Insert two AA batteries, paying careful attention to

their +/– orientation.

3 Close the cover.

When to change the batteries

If the remote control operating distance becomes short

or functions do not respond when their keys are pressed,

replace both batteries with new ones at the same time.

Precautions for the use of batteries

Misuse of batteries can cause them to leak or rupture,

for example. Please read the battery caution indications

and page 4 of this manual carefully.

Advertising