Teac X-48MKII - Manual (Page 25)

TASCAM X-48MKII
25
Mixer Bypass
Bypassing the mixer section improves input to output
delay and reduces CPU usage by keeping the mixer EQ,
level, etc. settings disabled when using the X-48MKII
strictly as a recorder. Mixer Bypass is switched on by
default, so you will need to disable it before using the
mixer section.
To access this setting:
Mouse/Keyboard Operation (only)
1 Open the Windows menu and select Settings.
2 Select the System tab.
3 Check or uncheck the Mixer Bypass checkbox.
Make a Default Project
You can define a default project which has all of the
routing and sync presets you typically use.
To do this:
Mouse/Keyboard Operation (only)
1 Open the File menu and select Save Project As...
2 Double-click D:, XProjects and Startup in order.
3 Name your project “Startup”. Click OK to replace the
old file.
4 – Configuration