Safety information, Rack-mounting the unit 8 – Teac X-48MKII User Manual

Page 4

Advertising
background image

4

TASCAM X-48MKII

Safety Information

This product has been designed and manufactured

according to FDA regulations "title 21, CFR, chapter 1,

subchapter J, based on the Radiation Control for Health

and Safety Act of 1968", and is classified as a class 1 laser

product. There is no hazardous invisible laser radiation

during operation because invisible laser radiation emitted

inside of this product is completely confined in the

protective housings.
The label required in this regulation is shown at 1.

Optical pickup

Type:

OWY 8/35, OWY 8/36, OWY8/44, OWY8/45

Manufacturer:

Pioneer CORP.

Laser output (CD): Less than 1.3mW (Play) and 104.7mW (Record)

on the objective lens

(DVD): Less than 1.08mW (Play) and 102mW (Record)

on the objective lens

Wavelength:

777-787 nm (CD)

656-663 nm (DVD)

CAUTION

DO NOT REMOVE THE PROTECTIVE HOUSING USING A

SCREWDRIVER.
USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.
IF THIS PRODUCT DEVELOPS TROUBLE, CONTACT YOUR

NEAREST QUALIFIED SERVICE PERSONNEL, AND DO

NOT USE THE PRODUCT IN ITS DAMAGED STATE.
CLASS 1M INVISIBLE LASER RADIATION WHEN OPEN

AND INTERLOCKS DEFEATED. DO NOT VIEW DIRECTLY

WITH OPTICAL INSTRUMENTS.

Rack-mounting the Unit

8

Use the supplied rack-mounting kit to mount the unit in a

standard 19-inch rack, as shown below.
Remove the feet of the unit before mounting.

Leave 2U of space above the unit for ventilation.

Allow at least 10 cm (4 in) at the rear of the unit for

ventilation.

For China

Advertising