Hs-4000 – Teac HS-4000 Addendum V1.22 User Manual
Page 2
X
HS-4000
2
TASCAM HS-4000
Playlist mode changes to ADJUST screen operations
and addition of rehearsal playback function for audio
monitoring
When editing playlist mode entries, the contents and operation of the screen
opened by the
ADJUST
button have been changed.
Additional items shown
0
The following items have been added to the playback area display.
Standard level line (0 dB)
i
Adjusted level line
i
Various mark icons
i
Use the . and / buttons to change the entry being adjusted.
Editing the playback beginning and ending points
0
Press the
1.
HOME key on the front panel to open the Home Screen.
Touch a file name or title name button and then touch the
2.
ADJUST ENTRY
button in the pull-down menu to open the
ADJUST XXX
screen. (“
XXX
” is the entry number.)
NOTE
You can also open this by touching the MENU button and then touching the
ADJUST button in the pull-up menu when a take is selected on the ENTRY screen
or one of the key assign buttons on the left is selected on the ASSIGN screen.
Touch the
3.
Start
End
Point
tab to open that page (if not open).
Touch a time display unit to highlight it yellow. The corresponding
4.
cursor will blink.
When a time field is selected, you can use the dial to adjust the
Start/End position.
If the selected field is increased/decreased past its maximum/
minimum, the next higher/lower field will also be increased/de-
creased by 1.
Select the frame field to edit at frame precision, and select the
5.
sample field to edit at sample precision.
Touch the
CURRENT
button to capture the current playback posi-
tion as the Start/End position.
Touch the
EDIT
button to switch between the number button and
mark list screens.
Touch the
6.
BC$
, button to open a confirmation pop-up window
to decide whether or not the BC$STANDBY and END mark times
are loaded as the start and end points. Touch the OK button in the
pop-up window to load the BC$STANDBY and END mark times as
the Start and End points.
Touch the
RESET
button in the pop-up window to reset the start
and end points to the beginning and end of the file.
NOTE
When changing the playback start and end time, settings will automatically be
restricted so that the total length between the start and end is longer than the
total fade-in and fade-out length. If the length between BC$STANDBY and END is
shorter than the total fade-in and fade-out time, the fade-in and fade-out times
will be cleared.
Editing the playback starting time
0
Press the
1.
HOME key on the front panel to open the Home Screen.
Touch a file name or title name display and then touch the
2.
ADJUST
ENTRY
button in the pull-down menu to open the
ADJUST
XXX
screen. (“
XXX
” is the entry number.)
NOTE
You can also open this by touching the MENU button and then touching the
ADJUST button in the pull-up menu when a take is selected on the ENTRY screen
or one of the key assign buttons on the left is selected on the ASSIGN screen.
Touch the
3.
Start TC Fade/Level
tab to open the following
screen.
Touch the
4.
EDIT
button to open the
EDIT
START
TC
screen, and use
the number buttons to adjust the Start TC.
Editing the fade-in/fade-out lengths and levels
0
Press the
1.
HOME key on the front panel to open the Home Screen.
Touch a file name or title name button and then touch the
2.
ADJUST
ENTRY
button in the pull-down menu to open the
ADJUST
XXX
screen. (“
XXX
” is the entry number.)
Touch the
3.
Start
TC Fade/Level
tab to open the screen shown
above.
After selecting the
4.
Fade
In
,
Fade
Out
or
Level
knob, turn the
DATA dial to change the setting.
Setting values:
Fade In/Out Length: 0-30 seconds (0.1 seconds/step when turning; 1.0
i
seconds/step when pressing and turning)
Level range: – ∞ to +10 dB
i
NOTE
When changing the fade-in and fade-out lengths, their settings will automati-
cally be restricted so they are less than the total length between the playback
start and end.
Rehearsal playback operation
0
Using the transport on this screen allows rehearsal playback.
The . and / keys function the same as regular transport controls
except they can be used to move between the file beginning, Start point,
End point and file ending.
Use the
PREVIEW
button to change the rehearsal playback contents.
If you change the
i
Start
point or
Fade
In
length, the
Start
point
will become the current playback position. If you make a change dur-
ing playback, playback will continue after moving to the new play-
back position.
If you change the
i
End
Point or
Fade
Out
Length, the current playback
position will change as follows. If you make a change during playback,
playback will continue after moving to the new playback position.
PREVIEW OFF
PREVIEW ON
When changing End
Point
2 seconds before End
Point
2 seconds before
Fade Out start posi-
tion
When changing Fade
Out length
2 seconds before
Fade Out start posi-
tion
2 seconds before
Fade Out start posi-
tion
Rehearsal playback when PREVIEW OFF
The recording is played back without being changed by the
i
Fade
In
,
Fade
Out
and
Level
Adjust
settings.
You can move to parts of the file outside the Start/End Point range.
i
When you reach the End Point during playback, playback will stop
i
and the Start Point will become the playback position.
Press the PLAY key to start playback from the Start Point.
Use the ,, / and SHIFT+/ keys or the JOG/SHUTTLE dial
to move past the End Point.