Hs-4000 – Teac HS-4000 Addendum V1.22 User Manual
Page 3
X
HS-4000
TASCAM HS-4000
3
Rehearsal playback when PREVIEW ON
Playback is only possible between the Start and End points.
i
Moving outside these points is not possible.
Fade
In
i
,
Fade
Out
and
Level
Adjust
settings affect the playback
signal.
NOTE
In order to prevent the rehearsal playback sound from being sent to the broad-
cast main line from the main outputs (rear panel LINE XLR outputs), the follow-
ing operations are restricted.
If the online function is set to Switchable and the online playback mode is ON,
i
the Adjust screen cannot be opened. (When in dual mode, this restriction applies
when the online playback mode of the corresponding player is ON.)
When the Adjust screen is open, you cannot turn the online playback mode ON.
i
(This restriction applies only to the player being adjusted when in dual mode.)
Changing assignments on the ENTRY list screen
Touch an entry name button on the
ENTRY
screen to open the take list,
which can be used to change assignments, on the right side.
Change the BC$STANDBY/END range in one operation
A new function allows you to change the BC$STANDBY–BC$END mark
range in one operation.
In playlist mode, open the pull-up menu on the file
1.
ASSIGN
screen
or
ENTRY
screen.
Touch the
2.
CAPTURE BC$
button, which has been added to the
pull-up menu, to open the following pop-up window message.
NOTE
Touch the CANCEL button in the pop-up window to return to the file ASSIGN
screen or ENTRY list screen.
Touch the
3.
CAPTURE
ALL
button pop-up window to open the follow-
ing pop-up window message.
In the confirmation pop-up window, touch the
4.
CAPTURE
ALL
but-
ton to change the BC$STANDBY–BC$END mark range.
NOTE
Touch the CANCEL button in the pop-up window to return to the file ASSIGN
screen or ENTRY list screen.
In the pop-up window that appears after step 1, if you touch the
5.
RESET
ALL
button, the following pop-up window message ap-
pears.
Touch the
6.
RESET
ALL
button in the pop-up window to reset the
entry's starting and ending times to the beginning and end of the
file.
NOTE
Touch the CANCEL button in the pop-up window to return to the file ASSIGN
screen or ENTRY list screen.