Teac US-322 - Manual (Page 12)

12
TASCAM US-322/366
3 − Installation
4. Click the “Install the Driver” button when the screen below
appears.
5. Read the contents of the License Agreement, and select “I
accept the agreement” if you agree to the terms. Next, click
the “Install” button to start installation.
6. When the screen below appears, use the supplied USB cable
to connect the unit to the PC.
USB
Computer
7. When the screen below appears, the installation is complete.
Click the “Reboot now” button to restart the PC to use the
driver.
Installing the driver for Mac OS X
Disconnect the USB cable from the unit before starting instal-
lation.
1. Load the included driver CD-ROM into the computer you are
using.
2. Double-click the CD icon that appears. Depending on the
Mac's settings, the CD icon might not appear. In this case,
use the Finder or another application to access the files on
the CD.
3. Double-click the driver disk image file (TASCAM_US-322_
US-366_driver_1.00.dmg), and then double-click the
“TASCAM US-322 US-366 1.00” file inside the open folder.
4. After the installer launches, follow the instructions on the
screen to proceed with the installation.
5. Click the “Restart” button to quit the installer and restart the
computer.