Teac CD-GT2 - Manual (Page 18)

1 TASCAM CD-GT2
IMPORTANT SAFETY PRECAUTIONS Names and functions of parts
and OFF. When IN and OUT points are set, this key turns
loop playback ON and OFF. When they are not set, it turns
repeat playback ON and OFF. (See “Loop playback” on
page 27 and “Repeat playback” on page 28.)
8 IN/OUT key
Use this key to set the loop playback IN and OUT points.
(See “Loop playback” on page 27.)
9 MISC. key
Press this key to open the
SETUP & MISC.
screen. Set
and use the metronome and make various device settings
on this screen.
0 TUNER key
Press this key to open the
TUNER
screen. Use this screen
for help tuning your instrument. (See “Using the tuner” on
page 33.)
q LEVEL key
Press this key to open the
LEVEL
screen. Select whether
to use the GUITAR/MIC IN jack for guitar input or mic
input and make independent adjustments for the input
signal and CD playback volumes on this screen. (See
“Using guitars and mics” on page 29.)
w CURSOR (§ , ¶ , ˙ , ¥ ) keys
Select among setting items on the screen with these keys.
e VALUE (+, –) keys
Change the value of the item selected on the screen.
r PHONES VOLUME (+, –) keys
Adjust the volume sent to your headphones using these
keys. The
PHONES VOLUME
screen appears during
adjustment.
t STOP key
Stops a CD that is playing or paused.
y ¥/π key
Starts playback of a stopped or paused CD. Pauses a
playing CD.
u ≤ , ˚ key
Press briefly to skip to the next track. Press and hold
this key to fast forward through a track that is playing or
paused. Press and hold this key when the CD is stopped to
automatically skip forward (increment) though the tracks.
i µ , ∆ key
Press briefly to skip to the previous track. Press and hold
this key to fast reverse through a track that is playing or
paused. Press and hold this key when the CD is stopped
to automatically skip backward (decrement) though the
tracks.
o FLASH BACK key
Press during playback to jump to a point in the track a few
seconds earlier and continue playback. Set the number
of seconds in the
SETUP & MISC. screen. (See “Jumping
back a few seconds (FLASH BACK)” on page 24.)