Teac CD-GT2 - Manual (Page 8)

 TASCAM CD-GT2
About this manual
When we refer to a key or connector or control on the CD-
GT2, the typeface looks like this:
PLAY .
When we refer to items shown on the display, the typeface
looks like this:
MENU
.
Environmental considerations
The CD-GT2 may be used in most places, but you should
observe the following environmental conditions to maintain
top performance and prolong operating life:
The nominal temperature should be between 5°C and 35°C
(41°F and 95°F).
Relative humidity should be 30 to 90 percent.
As the unit may become hot during operation, always
leave sufficient space above the unit for ventilation. Do not
install this unit in a confined space such as a bookcase, and
do not put anything on top of the unit.
Avoid installing this unit on top of any heat-generating
electrical device such as a power amplifier.
Make sure that the unit is mounted in a level position for
correct operation. •
•
•
•
•
Beware of condensation
If the unit (or a compact disc) is moved from a cold to a warm
place, or used after a sudden temperature change, there is a
danger of condensation. Vapor in the air could condense on
the internal mechanism, making correct operation impossible.
To prevent this, or if this occurs, let the player sit for one or
two hours at the new room temperature before using.
Cleaning the unit
Wipe dirt from the unit with a dry cloth. Never use thinner,
benzene or other solvents because they may cause acrylic parts
and coated surfaces to dissolve, labels to be eroded or other
damage.
Introduction