Teac CD-GT2 - Manual (Page 36)

 TASCAM CD-GT2
IMPORTANT SAFETY PRECAUTIONS Making various settings
You can change various settings to optimize the device for
your use environment and other requirements. All of the
following items are on the
SETUP & MISC.
screen.
Press the MISC. key to open the
SETUP & MISC.
screen.
Use the CURSOR ( § , ¶ ) keys to select the desired item and
the VALUE (+, –) keys to set the value.
Mono monitoring
You can output a mono signal from the PHONES and LINE
OUT jacks.
Select one of the following
MONO MONITOR
settings.
OFF
ordinary stereo monitoring (default setting)
L+R
both channel signals are mixed and output in mono
L
left channel signal is output on both channels
R
right channel signal is output on both channels
Splitting the CD and guitar sounds
You can split the CD playback signal and guitar (or mic) signal
output through the
PHONES and LINE OUT jacks so that only
the CD is on the left and only the guitar is on the right.
Turn the
SPLIT CD/GUITAR
setting ON to output the CD
playback signal to the L channel in mono and the GUITAR/
MIC IN signal to the R channel.