Teac CD-GT2 - Manual (Page 42)

2 TASCAM CD-GT2
IMPORTANT SAFETY PRECAUTIONS
This table explains the features of all the effect modules that comprise the effect presets of this device. Some individual effects
have greater results when used in combination with other effect modules. If you are unable to achieve the sound you seek even
after experimenting with all the parameters of each module in an effect preset, try a different preset.
Module Effect Parameter Details Range
Distortion
(
DST
)
Heavily distorts the guitar sound, making it stand out
with thickness and sustain for a nice lead sound. DIST Adjusts the amount of distortion 0–30
TONE Adjusts the tone 0–12
Overdrive
(
OD
)
Lightly distorts the guitar sound giving it the sound of
an overdriven amplifier—great for creating a warm clas-
sic rock sound. DRIV Adjusts the amount of overdrive 0–30
TONE Adjusts the tone 0–12
Compressor
(
CMP
)
Compresses the guitar sound, giving it clarity and
sustain—good for creating appealing, clean sounds. COMP Adjusts the amount of compression 0–30
TONE Adjusts the tone 0–12
Flanger
(
FLA
)
Gives the sound a moving modulation that can be
compared to the sound of a jet engine. SPD Adjusts the speed of modulation 0–30
MIX Adjusts the amount of the effect 0–20
Phaser
(
PHA
)
Gives the sound a rough modulation useful for creating
70s funk style sounds. SPD Adjusts the speed of modulation 0–30
MIX Adjusts the amount of the effect 0–20
Exciter
(
EXC
)
Adds high frequencies to the original sound to make
rich, shimmering tones that stand out. FREQ Adjusts the added high frequencies 0–30
MIX Adjusts the amount of the effect 0–20
Effect module parameter list