Teac CD-GT2 - Manual (Page 35)

IMPORTANT SAFETY INSTRUCTIONS
 TASCAM CD-GT2
Other functions
LEVEL
Adjust the output sound level between 0 and 100 with the
VALUE (–, +) keys.
CALIB
Set the standard frequency of middle A between 435 Hz and
445 Hz. This setting affects all tuner modes.
Using a footswitch
You can use a footswitch to control certain operations. A
footswitch can be set to control FLASH BACK, fast reverse or
fast forward, as well as to change the effect bank or turn the
effects ON and OFF.
Connecting a footswitch
Connect a TASCAM RC–30P or other momentary footswitch
(non-latching) to the FOOT SW jack on the front of the unit.
After connection, press the
MISC. key to open the
SETUP &
MISC.
screen and make settings as necessary.
Setting the function
Use the CURSOR ( § , ¶ ) keys to select
FOOT FUNC
, and the
VALUE (+, –) keys to choose one of the following functions.
FLASH
functions like the FLASH BACK key
REW
functions the same as the µ / ∆ key
FF
functions the same as the ≤ / ˚ key
BANK
changes the effect bank
EFFECT
turns the effects ON and OFF
Setting the polarity
When using a footswitch other than a TASCAM RC-30P, the
polarity might need to be changed. Use the
CURSOR ( § , ¶ )
keys to select the
FOOT TYPE
item and the VALUE (+, –)
keys to select
NORMAL
or
INVERT
according to the type of
footswitch used.