Important safety instructions, Safety information – Teac CD-GT2 User Manual

Page 5

Advertising
background image

IMPORTANT SAFETY INSTRUCTIONS



TASCAM CD-GT2

SAFETY INFORMATION

This product has been designed and manufactured according to
FDA regulations “title 21, CFR, chapter 1, subchapter J, based
on the Radiation Control for Health and Safety Act of 1968,” and
is classified as a class 1 laser product. There is no hazardous
invisible laser radiation during operation because invisible laser
radiation emitted inside of this product is completely confined in
the protective housings.

The label required in this regulation is shown at 1.

The CD-GT2 uses either a SONY or a SAMSUNG transport.

Optical pickup:

Type:

KSM-900AAA

Manufacturer: SONY Corporation
Laser output: Less than 1 mW on the objective lens
Wavelength:

775 to 816 nm

Type:

CMS-M93BG6

Manufacturer: Samsung Electro-Mechanics Co., Ltd.
Laser output: Less than 0.4 mW on the objective lens
Wavelength:

760 to 800 nm

CAUTION
• DO NOT REMOVE THE PROTECTIVE HOUSING USING A

SCREWDRIVER.

• USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

• IF THIS PRODUCT DEVELOPS TROUBLE, CONTACT YOUR

NEAREST QUALIFIED SERVICE PERSONNEL, AND DO NOT
USE THE PRODUCT IN ITS DAMAGED STATE.

• CLASS 1M INVISIBLE LASER RADIATION WHEN OPEN AND

INTERLOCKS DEFEATED. DO NOT VIEW DIRECTORY WITH
OPTICAL INSTRUMENTS.

DTA

Advertising