Teac DP-01 Series Owners Manual - Manual (Page 28)

EQ settings
28
TASCAM DP-01 Owner’s Manual
Advanced techniques
EQ settings
This can help you
emphasize the
particular points of the record-
ings on each track.
On the DP-01, you can set the frequency at which the EQ HIGH and EQ LOW
controls work; individually for each channel.
1 Press MENU , and then select the PREFERENCE menu.
The NSP setting is
only available on
the DP-01FX. The DP-01 will not
show this option.
2 Use the arrow keys to scroll to EQ FRQ :
3 Press the y cursor key:
4 Use the cursor keys and wheel to set these parameters.
Source This is the track affected by this setting, from Track1 through Track8 .
High This is the frequency for the EQ HIGH control. Choose from 1.7, 1.8,
1.9, 2.0, 2.2, 2.4, 2.6, 2.8, 3.0, 3.2, 3.4, 3.6, 3.8, 4.0, 4.5, 5.0, 5.5,
6.0, 6.5, 7.0, 7.5, 8.0, 9.0, 10, 11, 12, 13, 14, 15, 16, 17, 18 (all mea-
sured in kHz).
Low This is the frequency for the EQ LOW control Choose from 32, 40, 50,
60, 70, 80, 90, 100, 125, 150, 175, 200, 225, 250, 300, 350, 400,
450, 500, 600, 700, 800, 850, 900, 960 (Hz), 1.1, 1.2, 1.3, 1.4, 1.5, or
1.6 (kHz).
- - P R E F E R E N C E - -
P o s t : 1 . 5 S e c
E Q F R Q .
N S P : 1 0 l
- - E Q F R E Q U E N C Y -
S o u r c e / T r a c k 1
H i g h : 1 0 k H z
L o w : 1 0 0 H z