Verilink PRISM 4151 (34-00258) Product Manual User Manual
Page 23
Advertising
Configuration 3-11
PRISM 4151
Factory Reset: Clears all user selectable parameters
including the IP Address.
To exit this screen without performing the reset function,
press <return>with NO selected. To proceed with the reset
function, move the cursor to YES and press <return>.
The reset operation sets all parameters to the
factory default settings and zeros all perfor-
mance registers.
This command causes the unit to
restart and will interrupt network
traffic. Pressing <RETURN> on this field
to activate the command brings up the fol-
lowing warning:
ARE YOU SURE? - THIS WILL INTERRUPT DDS DATA
(NO!) (YES)
Advertising