Westermo IDW-90 - Manual (Page 32)

32 6620-2200
W – Connect message control
Syntax:
ATW<n>
Parameters:
<n>
0: Shows result code (RING, CONNECT) without additional info (default).
1: Result is presented with extended result codes. RING and CONNECT including
ISDN address, all others include error causes. Message RINGING will be displayed
with an outgoing call.
&W – Store system setting
Syntax:AT&W<n>
Parameters:<n>
0: Store the current configuration as profile 0
1: Store the current configuration as profile 1