Westermo IDW-90 - Manual (Page 35)

35 6620-2200
… Leased line connection
Leased Line
To set the adapter for leased line applications use the dipswitches.
Configure the units
at**defa=0 Set the unit to factory default
ATQ1 No result codes are sent on the RS-232/V.24 connection.
AT&W Store default settings
S1 Set DTE speed and format
S4:1 ON or OFF
S4:2 ON
S4:3 OFF Selects leased line, using channel B1 or B2
S3:1 OFF
S3:2 OFF
S3:3 ON
S3:4 OFF Sets B-channel protocol to HDLC transparent
S3:5 OFF
S3:6 OFF
S3:7 ON Sets connections behaviour to Connect always
To make the setting active the power must be cycled OFF -> ON.