Westermo U200 Installation guide - Manual (Page 15)

V4.2
www.westermo.com
U/R/T200 series
- 15 -
The fiber optic transceivers and associated patch cables must be treated with great care.
Therefore, the following rules should be adhered to during any commissioning work and fiber
optic installation.
•
Dust caps must be replaced immediately after removal of patch cable from
transceiver or patch box. Failure to comply could result in damage to transceivers or
patch cables.
•
Keep hands clean when touching fiber optic cable.
•
Patch cables should be cleaned with IPA and dried with a lint-free cloth before
installation.
•
Once patch cables have been installed dust will not ingress the transceiver