Westermo U200 Installation guide - Manual (Page 37)

V4.2
www.westermo.com
U/R/T200 series
- 37 -
8.3 IP configuration tool – software versions
The IP configuration tool version 9.9.x or newer can be used versus any managed switch
from Westermo. Switch control options for a given switch will be enabled based on the type
of switch and software version running on the switch. This means that no separate release
note exist for a new version of the IP configuration tool. How to use the IP configuration tool
is described in this document.
Old software versions of the IP configuration tool can be used versus R/T200 switches with
new features not supported in the IP configuration tool. However, the user will then not be
able to configure the new switch features. The release note of the R/T200 switch for a given
switch software version specifies the latest and recommended version of the IP configuration
tool.