7 upgrading of the r/t200 switch, 1 introduction – Westermo U200 Installation guide User Manual
Page 34
V4.2
www.westermo.com
U/R/T200 series
- 34 -
7 Upgrading of the R/T200 switch.
7.1 Introduction
Upgrading of the FS 200 switch is done by transferring a file called Vx(software version
number).BIN via FTP. Firmware upgrade is possible from software version 2.16 or newer
firmware.
This is done in two steps; first configure and start of the FTP server, second Transferring of
the BIN file via the IP configuration tool.
DO NOT REMOVE THE POWER SUPPLY DURING THE UPGRADE PROCESS !!
7.1.1 Typical problems
• FTP server not running
• Anonymous logins not allowed
• Image file does not exist in the home directory or root directory.
• Root directory access not allowed.
With the deployment of Windows XP Service pack 2 and various anti virus programs, the FTP
access might be stopped in the firewall on your PC. If this is the case, you either need to
configure your firewall to allow FTP access, or simply disable the firewall while you are
upgrading your Westermo switch.