ACTi Indoor Box Camera with Outdoor Housing on Vertical Pole - Manual (Page 11)

www.acti.com
Installation Guide
11
Step 6: Waterproof and Insert the Cable
1. As needed, detach one or more clamping nuts of the cable gland. The cable gland is where
the cable, like Ethernet and power, will pass through. Usually, one cable gland is used for
Ethernet and another one is used for the power cable.
2. Using a finger, push from one side to remove the sealing insert from the cable gland body.
3. Using a pointed object, such as a screwdriver, push through the thin rubber layer of the
sealing insert to create a hole.
Sealing Insert