ACTi Indoor Box Camera with Outdoor Housing on Vertical Pole - Manual (Page 36)

www.acti.com
Installation Guide
36
In the example below, we successfully found the camera that we had just connected to the
network.
By double-clicking the mouse on the camera model, it is possible to automatically launch the
default browser of the PC with the IP address of the target camera filled in the address bar of the
browser already.
If you work with our cameras regularly, then there is even a better way to discover the
cameras in the network – by using IP Utility . The IP Utility is a light software tool that can not
only discover the cameras, but also list lots of valuable information, such as IP and MAC
addresses, serial numbers, firmware versions, etc, and allows quick configuration of multiple
devices at the same time.