Step 6: waterproof and connect the cable – ACTi Indoor Box Camera with Outdoor Housing on Vertical Pole User Manual
Page 27
Advertising
![background image](/files/810693/content/doc027.png)
Installation Guide
Step 6: Waterproof and Connect the Cable
1.
Detach one of the clamping nut of the back cover.
2.
Using a finger, push from one side to remove the sealing insert from the cable gland body.
3.
Using a pointed object, such as a screwdriver, push through the thin rubber layer of the
sealing insert to create a hole.
Sealing Insert
Advertising
This manual is related to the following products: