Step 8: connect the ethernet cable – ACTi Indoor Box Camera with Outdoor Housing on Vertical Pole User Manual
Page 14
Advertising
Installation Guide
Step 8: Connect the Ethernet Cable
1.
Insert the Ethernet cable through the cable gland body and connect it to the Ethernet port of
the camera.
2.
Insert the sealing insert into the cable gland body.
3.
Attach the clamping nut to complete the cable solution.
NOTE:
Make sure the clamping nut is tightly attached to the cable gland body and the sealing
insert is squeezed in to avoid possible water leakage.
Advertising
This manual is related to the following products: