Step 9: connect the power cable – ACTi Indoor Box Camera with Outdoor Housing on Vertical Pole User Manual
Page 15
Advertising
![background image](/files/810693/content/doc015.png)
Installation Guide
Step 9: Connect the Power Cable
1.
Insert the power cable through one of the cable gland body and wire the connection to the
power connector.
2.
Insert the sealing insert into the cable gland body.
3.
Attach the clamping nut to complete the cable solution.
NOTE:
Make sure the clamping nut is tightly attached to the cable gland body and the sealing
insert is squeezed in to avoid possible water leakage.
Advertising
This manual is related to the following products: