Step 2: install the bracket – ACTi Indoor Box Camera with Outdoor Housing on Vertical Pole User Manual
Page 7
Advertising
![background image](/files/810693/content/doc007.png)
Installation Guide
Step 2: Install the Bracket
1.
Remove the screw to detach the camera holder from the bracket.
2.
Attach the bracket to the pole mount using the three (3) screws supplied in the pole mount kit.
3.
Route the Ethernet and power cable through the hole of the pole mount kit Pull enough length
to easily connect the cables to the camera later.
Advertising
This manual is related to the following products: