ACTi Indoor Box Camera with Outdoor Housing on Vertical Pole - Manual (Page 33)

www.acti.com
Installation Guide
33
Step 10: Adjust the Viewing Angle and Focus
1. As needed, turn the holder left or right to adjust the camera viewing direction. Then, secure
the screw tightly to fix the position.
2. As needed, loosen the two (2) side screws of the holder and then move the housing up or
down to adjust the camera viewing angle. Then, tighten the two (2) side screws to fix the
position.
3. To access the camera lens, remove the two (2) screws securing the glass panel.