Step 1: attach the pole mount and bracket, Outdoor housing, With heater and fan – ACTi Indoor Box Camera with Outdoor Housing on Vertical Pole User Manual
Page 5: 110v), 220v)
Installation Guide
Installation Procedures When Using
Housing with Heater and Fan
This section provides step-by-step procedures in installing the camera on a vertical pole using an
Pole Mount with Mounting Bracket and Housing with heater and fan.
Before installation, prepare the following tools and accessories which are not included in the
camera package, thus must be purchased separately:
Pole Mount with Mounting Bracket and Housing
SMAX-0093
for 110V or
SMAX-0094
for 220V
Outdoor Power Cable (length depends on installation requirement)
Exterior-Grade Ethernet Cable (length depends on installation requirement)
Step 1: Attach the Pole Mount and Bracket
1.
Using a screwdriver, turn the screw head of the wire strap counter-clockwise continuously
until the two ends are detached.
2.
Insert the wire strap through the strap holes of the pole mount.