ATL Telecom IP-3062 PoE Professional IP Telephone - Manual (Page 25)

Page 25
MOCET IP3062 Professional IP Phone Administrators’ Guide
Name Description
Enable IPSec
The default is disabled. When enabled, the phone will use the
configured parameters in IPSec Tunnel Items to create virtual
private networks (VPN) for communications.
VPN Gateway
Remote Internal IP
Selector
The default IP address of VPN Gateway and Remote Internal IP
Selector is 192.168.0.1.
In transport mode, you can set “VPN Gateway and Remote
Internal IP Selector” as the same with remote phone’s IP
address.
In tunnel mode, you need to set the correct VPN Gateway, so
phone can setup VPN tunnel with this gateway, and
communicate with Remote Internal IP Selector directly and
secretly.
Preshared Key
The default is null.
IKE Encrypt Method
Three options: DES, 3DES, AES. The default is DES.
IKE Integrity Method
Two options: SHA, MD5. The default is SHA.
ESP Encrypt Method
Three options: DES, 3DES, AES. The default is DES.
ESP Integrity Method Two options: SHA, MD5. The default is SHA.
Enable PFS
The default is enabled.
Phase 1 Lifetime (sec) The default value is 28800.
Phase 2 Lifetime (sec) The default value is 1800.
Security and Certificates Items Menu
The Security and Certificates items menu is accessible from Web Configuration Interface
only.
Name Description