ATL Telecom IP-3062 PoE Professional IP Telephone - Manual (Page 30)

Page 30
MOCET IP3062 Professional IP Phone Administrators' Guide
Getting the APS Server Address
The default APS server must be provided by the Operator/ ITSP or DHCP options.
Users are allowed to change the APS server by option “APS Server Address” via Web
Configuration Interface, and they can disable APS function by clear this option or uncheck
the “Enable APS” option. “Enable APS” option is false by default.
For example, find options below in $MAC.xml, and modify the values.
<APS_Enable type="integer">1</APS_Enable>
<APS_Server_Type type="integer">0</APS_Server_Type>
<APS_Server type="string">172.16.1.198</APS_Server>
DHCP Type (Default Network Type)
IP3062 phone will try to get the APS server address from DHCP option 66/150/159/160.
The option checking priority will be 160/159/150/66, and APS Server address supports
both IP address and URL.
If the phone does not get this information, it will use the local APS server address setting.
Static IP
The phone will use the APS server address specified in the web interface of the phone.
Firmware Upgrade
After the APS is enabled manually, IP3062 phone will try to download TCM_IP3062.xml
from the APS server with the format of
http://server-address/firmware/TCM_IP3062.xml .
For example, it will request the file as
http://aps.customer.com/firmware/TCM_IP3062.xml .
When the provisioning IP3062 XML file is downloaded successfully, then it will perform the
firmware upgrade check by checking <Firmware_Version>.
1. If the version of firmware in the phone is different from the what is specified in the
provisioning file, the phone will try to download the new firmware from the address
specified in the <Firmware_URL>. After the firmware upgrade, the phone will reboot
and perform the same provision action above again.